Site Information

 Loading... Please wait...

CALL TODAY 855-SUP-WAHOO (855-787-9246)

  • Inflation valve stem and gauge have twist tabs for easy install.
  • Image 2
  • Low profile is not obstructive during the inflation process and does not cause any additional strain on the board valve especially if connected to a heavy air hose.
  • Image 4
  • Patented design is low profile but pushes open the Wakooda inflation valves or any Halkey Roberts H3 valve for ample air movement for an easy and fast inflation.
  • The valve stem makes an air tight connection on your board locking to the valve when the valve protective cover is removed.
  • Remove the valve protective cover to install the valve stem for inflation.  After inflation, be sure to return the valve cover to protect your valve.
  • Use with any standard bicycle or car tire inflation hose connection.  Be sure your pump has an automatic shut off.  DO NOT OVER INFLATE.
  • The valve stem is strong enough to connect to a wide variety of hose connections, i.e. vertical or horizontal.
  • Horizontal hose connections are the best as the put the least amount of stress on your board, valve,and vale stem.
  • Image 11

WAKOODA Electric Pump Valve Stem and Inflation Gauge "Patent Pending"


Out of Stock

Product Description

This electric pump valve stem can be used to connect your GT150, GT126, LA132 or any other inflatable SUP with a Halkey Roberts H3 valve to an electric pump for fast inflation.  The valve stem connects to the valve on your board or kite or kayak by simply removing the protective cover on your board valve and connect the valve stem with a quick 1/4 turn to the right.  Connect your electric pump hose with the car tire inflation connector to the Schrader valve stem, set your PSI at the target PSI recommended by the manufacturer of your product, then start.  BE SURE NOT TO OVERINFLATE.  Make sure your electric pump has an automatic shut off after you set the target PSI.   Most inflatable SUP have a target PSI of 10-15.

Use this handy tool to save your energy for paddling.


Combined with the Wakooda Inflation Gauge, these 2 items can take all the guess work out of inflating and monitoring your iSUP, Kayak, or RIB.  Use the gauge to check target PSI and/or make sure your board is at the right PSI just for you.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category